Important Notice! Read This!

20 Ton Squirrel · 03-07-2002, 03:18 PM

Heya folks, there has been a change in the IP address of my server, thus you will have to update your gMUD or download it again (I updated it).

Just change the IP in gMUD to 208.31.38.3 and all should be well, if you wanna do it yerself.

I've also changed the recent version of the client to point at the correct port and took the liberty to code a 30 second connection timeout with a retry button. I'm doin' this cuz Red is out of town for the week, sleazing around in the red light district! Heheheh!

Lemme know how it works!

pinkaboo · 03-07-2002, 03:32 PM

Actually Meister Squirrel I wanted to ask you:

Is that
208.31.38.3 :1138
or
or 208.31.38.3:2020
or
does it matter?

(I'm sure Gmud and my client were different you see, which is preferable?)

K

20 Ton Squirrel · 03-07-2002, 04:03 PM

Astute question, Boo. The port for standard logins from apps like gMUD or MUSHclient is 1138. I have the daemon listening on port 1000 as well but I can't connect to it... maybe someone else will have better luck?

Port 2020 is for the client. I've already made the necessary changes to the project and posted it up again in the same spot.

So there ya have it!

Ricod · 03-07-2002, 04:55 PM

ah good ... its an adress change notice ... not an eviction notice

!

Rupert · 03-07-2002, 10:44 PM

Dang - now I can't get on at all through either one. Now I'm going to have to do some work instead.

Mutter grumble mutter..

zoomfreddy · 03-08-2002, 12:25 AM

and...where is the url of the new client?

pinkaboo · 03-08-2002, 04:45 PM

Quote:

and...where is the url of the new client?

ok, I have it on good authority from the squirrel himself that this is the link you are after, it wasn't working earlier but it sure is now:

ASclient - go chat!

K

zoomfreddy · 03-08-2002, 07:34 PM

Hey..thanks Pink!!!, you right, that url was not working, but now it is

see you.

20 Ton Squirrel · 03-08-2002, 07:46 PM

Ummm... yeah, I was an idiot and forgot about case sensitivity. There's a world of difference between ASClient and ASclient. Werd to yer momma.

03-07-2002, 03:18 PM	#1
20 Ton Squirrel Risu Oyabun! Join Date: Apr 2001 Location: Houston, Texas Posts: 1,460	Important Notice! Read This! Heya folks, there has been a change in the IP address of my server, thus you will have to update your gMUD or download it again (I updated it). Just change the IP in gMUD to 208.31.38.3 and all should be well, if you wanna do it yerself. I've also changed the recent version of the client to point at the correct port and took the liberty to code a 30 second connection timeout with a retry button. I'm doin' this cuz Red is out of town for the week, sleazing around in the red light district! Heheheh! Lemme know how it works!

03-07-2002, 04:55 PM	#4
Ricod (@_@) -("pretty lights") Join Date: Sep 2001 Location: the Netherlands Posts: 3,988	ah good ... its an adress change notice ... not an eviction notice ! __________________ RicoD Link ?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamicaly read variable in embed tag	drliebs	ActionScript 1.0 (and below)	1	05-23-2006 10:40 AM
actionscript to read from command line	hp77	ActionScript 2.0	0	11-12-2004 02:10 AM
Read Now!!!!!!!!!!!!!!!!!!!!!	Mortimer Jazz	Other Flash General Questions	4	09-23-2003 07:05 AM
read from txt without &	artbearny	ActionScript 1.0 (and below)	17	01-15-2003 01:53 PM

03-07-2002, 03:32 PM	#2
pinkaboo power to the pinK Join Date: Jul 2001 Location: Atlanta Atlanta ATLANTA! Posts: 1,527	Actually Meister Squirrel I wanted to ask you: Is that 208.31.38.3 :1138 or or 208.31.38.3:2020 or does it matter? (I'm sure Gmud and my client were different you see, which is preferable?) K


<a href='http://d1.openx.org/ck.php?n=ac86e9f0&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://d1.openx.org/avw.php?zoneid=36053&source=_blank&cb=INSERT_RANDOM_NUMBER_HERE&n=ac86e9f0' border='0' alt='' /></a>

03-07-2002, 04:03 PM	#3
20 Ton Squirrel Risu Oyabun! Join Date: Apr 2001 Location: Houston, Texas Posts: 1,460	Astute question, Boo. The port for standard logins from apps like gMUD or MUSHclient is 1138. I have the daemon listening on port 1000 as well but I can't connect to it... maybe someone else will have better luck? Port 2020 is for the client. I've already made the necessary changes to the project and posted it up again in the same spot. So there ya have it!

03-07-2002, 10:44 PM	#5
Rupert Registered User Join Date: Mar 2001 Location: Melbourne, Australia Posts: 618	Dang - now I can't get on at all through either one. Now I'm going to have to do some work instead. Mutter grumble mutter..

03-08-2002, 12:25 AM	#6
zoomfreddy anything...are you sure? Join Date: Jul 2001 Location: Mexico City Posts: 560	and...where is the url of the new client?

03-08-2002, 07:34 PM	#8
zoomfreddy anything...are you sure? Join Date: Jul 2001 Location: Mexico City Posts: 560	Hey..thanks Pink!!!, you right, that url was not working, but now it is see you.

03-08-2002, 07:46 PM	#9
20 Ton Squirrel Risu Oyabun! Join Date: Apr 2001 Location: Houston, Texas Posts: 1,460	Ummm... yeah, I was an idiot and forgot about case sensitivity. There's a world of difference between ASClient and ASclient. Werd to yer momma.